Dmytro Kryvoruchko

Scientific degree:
2011: Doctoral Studies in Machining Processes, Machines and Tools at Sumy State University, Sumy, Ukraine.
Theme: Scientific backgrounds of machining simulation using numeric methods.
Degree: Doctor of Science in Machining Processes, Machines and Tools from National Technical University «KhPI», Kharkov, Ukraine
2003: Ph.D. Studies of Machining Processes, Machines and Tools at Sumy State University, Sumy, Ukraine
Theme: An increase of finish operation efficiency by means of analytical modeling of tool-workpiece force interaction.
Degree: Candidate of Science (Ph.D.) in Machining Processes, Machines and Tools from Bakul V.M. Institute for Superhard Materials of National Academy of Science of Ukraine, Kiev, Ukraine

Scientific title:
since 2010: Associate Professor of the Department of Manufacturing Engineering, Machines and Tools at Sumy State University, Sumy, Ukraine

Research interests:
Automation, Metal Cutting Theory, Computer Simulation, Machining

Work experience:
since 2011: Director of LLC «Center of Technological Initiatives»
since 2007: Associate Professor, Head of Division of Manufacturing Engineering of Department of Manufacturing Engineering, Machines and Tools, Sumy State University, Sumy, Ukraine
2002 - 2003: Senior Lecturer at Department of Manufacturing Engineering, Machines and Tools of Sumy State University, Sumy, Ukraine
since 2002: Siemens, Fanuc, Heidenhain, НЦ-31, WL4M CNC Controller System Repairs Services
since 1999: Researcher of the Department of Manufacturing Engineering, Machines and Tools at Sumy State University, Sumy, Ukraine

List of most important publications:

Залога, В. А. Имитационная модель прямоугольного свободного резания / В. А. Залога, Д. В. Криворучко, С. Н. Хвостик //Вісник Сумського державного університету. -Суми: Вид-во СумДУ, 2005. -№ 11. -C. 55-66.
Залога, В. А. Прогнозирование динамического состояния инструмента при концевом фрезеровании / В. А. Залога, Д. В. Криворучко, С. С. Емельяненко //Сучасні технології у машинобудуванні. –Харків:НТУ«ХПІ»,2006.–Т.2.–С.146-156.
Криворучко, Д. В. Анализ современных методов численного моделирования тепловых явлений при резании материалов / Д. В. Криворучко, В. А. Залога, Н. П.Мазур //Сучасні технології у машинобудуванні. –Харків: НТУ «ХПІ», 2007. -C. 31- 42.
Heisel, U. Die FEM-Modellierung als moderner Ansatz zur Untersuchung von Zerspanprozessen/ U. Heisel, D. V. Kryvoruchko, V. A. Zaloha, M. Storchak, T. Stehle // ZWF. – 2009. -№7-8. -С. 604-616.
Heisel, U. Thermomechanische Materialmodelle zur Modellierung von Zerspanprozessen/ U. Heisel, D. V. Kryvoruchko, V. A. Zaloha, M. Storchak, T.Stehle//ZWF.–2009.-№ 6.-С.482-491.
Heisel, U. Bruchmodelle für die Modellierung von Zerspanprozessen/ U. Heisel, D. V. Kryvoruchko, V. A. Zaloha, M. Storchak, T.Stehle // ZWF.–2009.-№5.–С.330-339.
Heisel, U. Thermomechanische Wechselwirkungen beim Zerspanen / U.Heisel, D. V. Kryvoruchko, V. A. Zaloha, M. Storchak, T.Stehle // ZWF.- 2009.–№ 4. –С.263-272.
Залога, В. А. Исследование методом конечных элементов динамики изменения силы резания при врезании / В. А. Залога, Д. В. Криворучко, М. Г. Сторчак, С. С. Емельяненко, С.М. Селивоненко// Вісник Сумського державного університету. –Суми: Вид-во СумДУ, 2008. - № 3. – С. 13–24.
Залога, В. А. Классификация задач моделирования процессов резания материалов / В. А. Залога, Д. В. Криворучко, С.С. Ковальчук // Сучасні технології в машинобудуванні. –Х.: НТУ «ХПІ», 2009. -Вип.3. – С. 186-196.
Залога, В. О. Прогнозування деформаційної складової сил тертя на контактних поверхнях різального інструмента / В. О. Залога, Д. В. Криворучко, О. О. Залога // Процеси механічної обробки в машинобудуванні. - Житомир: ЖДТУ, 2009. – №3 (50). – С. 38 – 45.
Криворучко, Д. В. Основи 3D-моделювання процесів механічної обробки методом скінченних елементів: навчальний посібник / Д. В. Криворучко, В. О. Залога, В. Г. Корбач. -Суми: Вид-во СумДУ, 2010. –208 с.
Залога, В. А. Об изменении состояния режущих кромок концевых фрез в процессе резания/В. А. Залога, Д. В. Криворучко, С. С. Некрасов, Л. В. Голобородько//Вісник Сумського державного університету. Серія Технічні науки. -Сумы: СумГУ, 2010. -№ 4. -C. 172- 181.

Reports at international conferences:

Heisel, U. Cause Analysis of Errors in FE Prediction Orthogonal Cutting Performances/ U.Heisel, D. V. Kryvoruchko, V. A. Zaloha, M.Storchak // Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations. -Calabria, 2007. -C.141-148.
Heisel, U. Finite Element Analysis of Cutting Force Dynamics / U.Heisel, D. V. Kryvoruchko, V. A. Zaloha, M. Storchak, S. S. Emelyanenko, S. N. Selivonenko //Proceedings of the 11th CIRP International Workshop on Modeling of Machining Operations. -Gaithersburg: NIST, 2008. -C. 163- 170.
Heisel U. Modeling of Interaction Processes in Cutting [Електронний ресурс]/ U. Heisel, M. Storchak, D. V. Kryvoruchko, S. Braun // Proceedings of 2nd Interna-tional CIRP Process Machine Interaction (PMI) Conference. -Vancouver: University of British Columbia, 2010. -8с.

Teaching experience:

since 2009: Computer Systems of Technological Preparation of Production, Simulation of Technological Processes and Equipment by the Finite Element Method, Basics of 3D Modeling of Cutting Processes
since 1999: Metal Cutting Theory, Mathematical Simulation, Metal-cutting Machines, Work Process of High Technologies, Technological Equipment of Tool Production, Simulation Modeling of Technological Processes and Equipment by the Finite Element Method

Awards and honours:

2011: Diploma of the Ministry of Education and Science of Ukraine
2001-2002, 2003-2004 and 2010-2011: Grant of the Verkhovna Rada of Ukraine for young scientists
2010: Award of the Sumy State University for Preparation of 2 students which have scored prize-winning places at Whole-Ukrainian Student Scientific Work Competition
2009: Diploma of the Ministry of Education and Science of Ukraine for preparation of the students which has scored prize-winning places at Whole-Ukrainian Student Scientific Work Competition

Other activities:

since 2011: Review of Journal «Bulletin of Sumy State University»
since 2010: Member of research board of Faculty of Technical Systems and Energy Efficient Technologies
since 2010: Member of Society for the Advancement of Material and Process Engineering
since 2007: Vice Chairman of the Examination Board Manufacturing Engineering Education
since 2004: Co-organizer of the laboratory of mechanical tests of the Sumy State University
since 2001 року: Co-organizer and secretary of annual Whole-Ukrainian Scientific and Technical Conference of Young Scientists «Machine building of Ukraine by Eyes of Youth: Progressive Ideas – Science – Manufacture»
since 1999 року: Executor of research projects with Open Society «Ukrainian Research Insitute of aircraft technologies», Open Stock Company «Sumy plant «Nasosenergomash» etc.